Features:
World's smallest size
Light weight, 810g with battery pack
Cladding alignment with fixed V-groove
Fiber Holder system
Arc calibration-free system
Single fiber splicer & Mass fiber splicer available
Dual directional operating system
Specifications:
| Model | SpliceMate FSM-11S: Single fiber splicer |
| SpliceMate FSM-11R: Mass fiber splicer up to 4-fiber | |
| Applicable fibers | SM (ITU-T G.652), MM (ITU-T G.651), NZDS (ITU-T G.655), DS (ITU -T G.653) |
| Fiber Count | FSM-11S: Single FSM-11R: Single, 2, 4 |
| Cladding diameter | 125µm |
| Coating diameter | 250 and 900µm |
| Fiber cleaved length | 10mm |
| Actual average splice loss | 0.05dB with SM, 0.02dB with MM, 0.08dB with NZDS, 0.08dB with DS. Measured by cut-back method relevant to ITU-T and IEC standards. |
| Splicing time | FSM-11S: Typical 15seconds with standard SM fiber. FSM-11R: Typical 20seconds with standard SM fiber. |
| Return loss | >>60dB |
| Splicing modes | 40 user programmable modes and up to 60 modes for reference (factory predetermined setting). |
| Splice loss estimate | Available |
| Storage of splice result | FSM-11S: The last 2,000 results to be stored in the internal memory. FSM-11R: The last 1,400 results to be stored in the internal memory. |
| Fiber display | X / Y |
| Magnification | FSM-11S: 130x for single X or Y view. FSM-11R: 43x for single X or Y view. |
| Viewing method | Two CMOS cameras and 3.5inch color LCD monitor. |
| Operating condition | 0 to 3,660m above sea level, 0 to 95%RH and -10 to 50°C respectively. |
| Mechanical proof test | 2N |
| Tube heater | Built-in tube heater with 10 heating modes and up to 20 modes for reference. |
| Tube heating time | Typical 40seconds with FP-03(L=40) protection sleeve. |
| Applicable protection sleeve length | 60mm and 40mm |
| No.of splice/heating with battery | Typical 30 cycles with BTR-07. |
| Power supply | 100 to 240V AC with ADC-10 through DCA-02. 10 to 15V DC with DCA-02. 11.1V DC with BTR-07. |
| Terminals | USB 1.1 (mini type) for PC communication. |
| Wind protection | Max. wind velocity of 15m/s. |
| Dimensions | 110W x 80D x 100H (mm) |
| Weight | 640g (810g including battery pack BTR-07) |
To see the technical specifications in PDF format, please consult the following document:
fibre_splicers_splicemate.pdf (919.74 KB)
Related information about the same topic:
- Fujikura
)
)
)
)
