FSM 60S - Technical details Single fibre arc fusion splicer

Applicable fibres

SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) and other SMF including ITU-T G.657 fibres

Fibre Count

Single

Cladding diameter

80 to 150um

Coating diameter

100 to 1000um

Fibre cleaved length

8mm to 16mm using Sheath Clamp A, B or C/ 10mm using FH-60-250, FH-60-900

Actual average splice loss

0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Measured by cut-back method relevant to ITU-T standards.

Splice time

Typical 9sec. with standard SM fibre.

Return loss

60dB or greater

Splicing modes

Total number available equals 100; for pre-set modes and user programmable modes

Splice loss estimate

Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate.

Attenuation splice function

Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator

Storage of splice result

The last 2000 results to be stored in the internal memory.

Fibre display

X/Y, or both X and Y simultaneously

Magnification

300x for single X or Y view, or 187x for X and Y view.

Viewing method

By two CMOS cameras for fibre viewing and 4.1inches TFT colour LCD monitor

Image change over

The fibre image is turned upside down automatically according to the monitor position.

Operating condition

0-5000m above sea level, 0-95% RH and -10 to 50C respectively.

Mechanical proof test

2N (standard)

Tube heater

Built-in auto-start tube heater with 10 heating modes and up to 20 for reference

Tube heat time

Typical 30sec.with FP-03 protection sleeve.

Applicable protection sleeve length

60mm, 40mm and a series of micro sleeves.

No. of splice/heating with battery

160 cycles with BTR-08.

Power supply

Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-13. 13.2Vd.c. with BTR-08

Terminals

USB1.1 (USB-Mini B) for data and video signal transfer to PC.

Wind protection

Max. wind velocity of 15m/s.

Dimensions

136(W) x 161(D) x 143(H) mm

Weight

2.3kg, with ADC-13 AC Adaptor, 2.7kg, with BTR-08 Battery

Description

Model No.

Q'ty

Note

Arc Fusion Splicer

FSM-60S

1pc.

_--

Sheath Clamp

CLAMP-S60A

1pc.

Installed

Electrodes

ELCT2-20A

1 pair

Installed

Wind Protector Mirror

WPM-08

2pc.

Installed, replaceable by user

AC Adaptor/Battery Charger

ADC-13

1pc.

_--

AC Power Cord

ACC-xx

1pc.

ACC-16 UK Type

Spare Electrodes

ELCT2-20A

1 pair

_--

USB Cable

USB-01

1pc.

--

Quick Reference Guide

M-60S/18S-E

1pc.

English

Video Instruction Manual

V-60S-E

1pc.

CD, English

Warning & Cautions

W-60-E

1pc.

English

Splicing Report

-

1pc.

English

J-Plate

JP-05

1pc.

_--

Carrying Case

CC-24-60S

1pc.

--

Description

Model No.

Note

Fibre Holder

FH-60-250

For 250um coating

FH-60-900

For 900um coating

Sheath Clamp

CLAMP-S60A

For coating diameter up to 250um, 8mm to 16mm cleave

For coating diameter of over 250um, 16mm cleave

CLAMP-S60B

For coating diameter up to 1000um, 8mm to 16mm cleave

CLAMP-S60C

For 900um loose tube fibre

Battery Pack

BTR-08

--

Battery Charge Cord

DCC-14

Use for connecting BTR-08 and ADC-13

DC Power Cord

DCC-12

For ADC-13, cigarette lighter socket type

DCC-13

For ADC-13, alligator clamp type

Magnifier

MGS-06

With bracket

Electrodes

ELCT2-20A

--

Wind Protector Mirror

WPM-08

--

High Precision Fiber Cleaver

CT-30

--